A mostrar 1–12 de 26 resultados

  • Alpha X Pouch inlays

    This is a complete set of Alpha-X Pouch Inlays in the color of your choice.

    Includes left, right and side inlays. Depending on where you mount the ball joint attachment, one inlay part will not be used.

    Please note that these inlays have a protective transparent film on their front and 3m adhesive tape cover on their back. both should be peeled off before installation..

    In order to install the inlays do the following:

    1. Carefully break the pieces out of their frame. There are several small bridges holding them in place which can be broken by hand.
    2. If you wish, you can use a knife to clean off the tails left by the bridges, but this should not be strictly necessary.
    3. Peel off the transparent film from the front, as well as the 3M adhesive cover from the back.
    4. Position the inlays over their correct pockets in the pouch body and fit them in place.

    Should you wish you remove the inlays after installation, you can do so thanks to the small holes drilled through the pouch body. In order to access these holes, you will need to remove all plastic spacers first. Then, using a sharp tool (like a small hex key) you can push on the inside of the inlay until it comes loose in the corner. Then, gently work it out of its pocket. Note that the inlay may break when removed.

    3.95 IVA incluido Ver opções
  • Alpha-X Pouch without Inlay (Sem autocolantes)

    51.00 IVA incluido Ler mais
  • Alpha-XI Pouch – Single Stack Adaptor

    The Alpha-X Magazine pouch is designed wide enough to hold most double-Stack magazine, and supplied with 3 sets of spacers to fit a wide variety of those magazines. Single-Stack 1911 shooters who wish to use these pouches too, and take advantage of their unique new features and performance can now do so, thanks to this […]

    4.57 IVA incluido Adicionar
  • Alpha-Xi Pouch Inlay

    This is a complete set of Alpha-X Pouch Inlays in the color of your choice.

    Includes left, right and side inlays. Depending on where you mount the ball joint attachment, one inlay part will not be used.

    Please note that these inlays have a protective transparent film on their front and 3m adhesive tape cover on their back. both should be peeled off before installation..

    In order to install the inlays do the following:

    1. Carefully break the pieces out of their frame. There are several small bridges holding them in place which can be broken by hand.
    2. If you wish, you can use a knife to clean off the tails left by the bridges, but this should not be strictly necessary.
    3. Peel off the transparent film from the front, as well as the 3M adhesive cover from the back.
    4. Position the inlays over their correct pockets in the pouch body and fit them in place.

    Should you wish you remove the inlays after installation, you can do so thanks to the small holes drilled through the pouch body. In order to access these holes, you will need to remove all plastic spacers first. Then, using a sharp tool (like a small hex key) you can push on the inside of the inlay until it comes loose in the corner. Then, gently work it out of its pocket. Note that the inlay may break when removed.

    4.02 IVA incluido Ver opções
  • Alpha-Xi Pouch with Color Inlays

    The Alpha-Xi magazine pouches have evolved from the Alpha-X mag pouches introduced in early 2018. We listened to customer-feedback, both positive and negative, and worked to develop our next generation pouch that builds on the strongest features of the Alpha-X pouch, while addressing and resolving its weaknesses. The new pouch has a striking modern look with […]

    From 55.86 Select options
  • Alpha-Xi Pouch without Inlay (Sem autocolantes)

    NOTE: This is an Alpha-Xi Magazine Pouch without Inlay! You can order your Alpha-X mag pouches without a color inlay, and order the inlays separately. This is particularly handy for our stocking dealers. The Alpha-Xi magazine pouches have evolved from the Alpha-X pouches introduced in early 2018. We listened to customer-feedback, both positive and negative, and […]

    51.84 IVA incluido Adicionar
  • Alpha-XiP Pouch

    The DAA Alpha-XiP magazine pouch is a more affordable version of our flag-ship Alpha-Xi pouch. By incorporating an injection-moulded pouch body instead of the CNC machined aluminum and anodized pouch body of the Alpha-Xi, we are able to offer all the same great features at a substantially lower price! The Polymer used in the pouch body of […]

    42.64 IVA incluido Ver opções
  • Alpha-XiP with Magnet

    Pouch The DAA Alpha-XiP magazine pouch is a more affordable version of our flag-ship Alpha-Xi pouch. By incorporating an injection-moulded pouch body instead of the CNC machined aluminum and anodized pouch body of the Alpha-Xi, we are able to offer all the same great features at a substantially lower price! The Polymer used in the pouch body […]

    57.89 IVA incluido Ver opções
  • CR Speed Versa Pouch Black with C-Bax

    Shipping with C-Bax Hangers only! Note these hangers do not fit DAA Belts. Use only with CR Speed Belts! Versatility & Value!, L/H & R/H. Fits Most Popular Pistol Magazines. This Pouch is fully Ambidextrous giving Left & Right handed shooters the same benefits. Supplied with Inserts to fit. Hi – Cap Mags “Para, STI, […]

    33.95 IVA incluido Adicionar
  • CR Speed Versa Pouch Black with C-Bax + Magnetic Front

    Shipping with C-Bax Hangers only! Note these hangers do not fit DAA Belts. Use only with CR Speed Belts! Versatility & Value!, L/H & R/H. Fits Most Popular Pistol Magazines. This Pouch is fully Ambidextrous giving Left & Right handed shooters the same benefits. Supplied with Inserts to fit. Hi – Cap Mags “Para, STI, […]

    49.00 IVA incluido Adicionar
  • DAA Magnet Cover

    The DAA Magnet Cover is a practical and super-attractive addition to your Rig! Designed to perfectly fit on the DAA 48mm large magnets, this cover is custom made from durable nylon, rubber coated, and incorporates a laser-cut stainless-steel (430) DAA Logo. The logo itself is what firmly holds the cover in place – being made […]

    10.11 IVA incluido Ler mais
  • DAA Magnet inc. screw and countersunk nut for SS Racer pouch

    A simple and effective solution for mounting a large magnet onto the DAA Single stack Racer Pouches. Set includes our large 42mm N42 powerful magnetic, a countersunk M5 nut and a 12mm M5 screw.   The body of your Single Stack Racer pouch already includes an additional hole on its outer side, which includes the […]

    19.26 IVA incluido Adicionar